Metrolog XG 5 release notes

Visit our Web Site : http://www.metrologic.fr/
Send us an E-mail : metrologic@metrologic.fr

  

Important : the functionalities marked with * are software options.

Geometrical Features

  • Possibility to measure a projection plane on the fly when manually measuring a 2D feature (circle, arc, rectangle, slot, etc.).

                 

  • Option to automatically measure a feature by clicking on CAD model improved.

                 

  • Clearance Planes algorithms improved.
  • Measurement of Gasket scan, using point to point or scanning mode, specific method for programming scanning path.
  • GD&T : Support of Composite Tolerances.

                 

 

Free Form Features

  • Possibility to define sections by clicking on CAD model curves.
  • Measuring sections in continuous mode.
  • Surface points new projection mode : Scribe Line.
  • Possibility to modify the projection surface for a group of selected surface points from the features database.

  • Probe radius automatically taken into account in the search distance for surface point projection.
  • New rules for surface point Normal Deviation calculation (can be based on probing direction, or on CAD normal or on definition alignment).

                 

 

Reporting

  • Edit views in report editor (modify zoom, stickers, display options, etc. and save modifications in view or in program).
  • Wizard for creating reports.

  • News modes for positioning stickers : sticker can be automatically created from a selection of feature and positioned close to the feature.

  • Use the active sticker’s parameters to define the default parameters for all stickers.
  • Sticker features symbols can be customized.

 

Probes management

  • Error management during probe calibration is improved.
  • Scanning speed and probing speed in scanning mode are two separate parameters.

                 

  • Zeiss DSE probe head is supported*.

 

Alignments

  • New degree of freedom for Best-Fit Alignment function: Scale Factor.

                 

  • Best-Fit’s Scale Factor is supported in the Expansion/Shrinking function.

                 

  • Possibility to define alignments by selecting imported alignment entities in the CAD database.

                 

 

GM2 and D.M.I.S. Part Programs

  • DMIS engine: Extreme Point Construction function  is implemented (CONST/EXTREM).

                 
                 

  • Use variables in the construction of planes by offset.

                 

  • Open Working Session command supported into a part program.
  • DMIS engine: when constructing features, nominal values are automatically recorded into program.

                 

  • DMIS engine: program is generated based on default Precision Parameters.
  • Following DMIS commands are supported:
     - OBTAIN/SA(MyProbe),10
     - DMESW/COMAND,'SAVEWORKSESSION,MyWorkingSession'
     - DMESW/COMAND,'FAMILY',MyNewFamilyName,Feat1,Feat2,Feat3.

 

Import - Export

  • Import DMIS 4.x to DMIS 5.0 (mainly for scanning instructions).

                 

  • IDP (Intelligent Data parser) to import any generic ASCII files*.
  • Possibility to choose features to export, different from those to be printed.

                 

  • Export points with detailed information (Metrolog for Leica only).
  • Export working session results to MM3 file format* improvement.

 

Laser Tracker and Portable CMM

  • Circles and arcs can be measured with 1 point and rectangles and slot with 2 points.

                 

  • More detailed information in the feature’s Detailed View about probing, when using a Laser Tracker (reflector used, temperature, humidity, etc.).

        

  • Assistant for measuring gravity plane (Metrolog for Leica only).
  • Function  "take a $ point" is implemented,  $ point is now displayed in 3D view.

                 

  • Commands Initialize, Go Birdbath, Switch to Face1/Face2 supported in program.
  • Spatial or Temporal modes are implemented when scanning  points using a Laser Tracker.
  • "Stable measurement" mode is implemented. Point is automatically taken as soon as reflector is in a stable position, using a Laser Tracker.

                 

  • New mode to detect probing direction on Faro arms.
  • Probes changes are automatically detected on Romer Sigma arms.
  • Lasers Trackers are virtually displayed in 3D view (Metrolog for Leica only).

                 

 

CAD file Functionalities

  • Import of CAD files assembly by created separated (*.su3) files for both Catia V5 and ProE via toolkit files.

                 

  • Import of CatProduct including both Catia V4 and Catia V5 files.
  • Possibility to visualize surface direction of a CAD model using colors and can invert this  direction directly on 3D view.
  • Create layers in a CAD file containing entities all of which have the same color.

                 

  • Catia v5 "Datum Targets" are supported.
  • IDEAS (SDRC) dimensional tolerances are supported (displayed in 3D view). 
  • Alignment data imported and supported in CAD database (IGES, Catia V4 and V5 formats).

                 

 

Optical sensors

  • Optical laser scanner sensors are supported (definition, calibration,...)*.
  • Cloud of points acquisition by scanning.
                 
                 
  • Geometrical features extraction from cloud of points*.
                 
                 
  • Cloud of points are displayed in the 3D view.

                 

  • Cloud of points can be exported/imported*.
  • Beam is displayed in the DRO window.

                 

  • Datapixel (Optiscan), Kreon (KZ25, KZ50, KZ100), Perceptron and Metris (LC et XC) sensors supported*.
  • Parameter set-up in Setup Assistant.

 

CMM interface

  • Zeiss MZ 1060*.
  • Coord 3 Ethernet*.
  • API Tracker III*.
  • Leica via emScon 2.3*.
  • LK via driver 4.1*.
  • SIP* : possibility to define stylus orientation, calibration by learning probing points and via points.

 

Miscellaneous

  • On line help and documentation completely updated.
  • New setting in 3d View to change Color Mapping display.

  

  • Comma decimal separator is supported in feature definition windows.
  • Expansion/Shrinking function improved (scale factor, distance, etc.).

                 

  • Default name incrementing can be modified.
  • DMIS Script Engine improvement.

 

                  Top of page                                         Summary